GALAX PRO-A team specializing in the production of power tools, such as circular saw, mini circular saw, reciprocating saw and so on. If you are a DIY lover, GALAX PRO is your right choice.
Oscillating tools are extremely versatile, with countless attachments for a variety of tasks including cutting, sanding and scraping. It is a versatile tool for home repair, remodeling, and restoration
Making plunge cuts
Attach a plunge cutting blade, and use it to make cutouts in plasterboard, plywood or weatherboard, or for cutting out damaged sections of wall.
Undercutting door jambs
When installing floating floors, you’ll often need to trim the base of the doorjambs. Use a segment blade to trim the doorjamb, positioning a flooring offcut underneath the blade to align it at the correct height.
Slicing through fasteners
When replacing weatherboards or trim, you may encounter nails or screws that are impossible to remove. Slide a metal cutting blade behind the trim and cut them loose, protecting the wall surface with a sheet metal offcut.
Scraping away glue
With a scraper attachment, an oscillating tool can be used to remove dried adhesives from hard surfaces, like concrete garage floors. You can also use it to remove silicone sealant, or to scrape away small concrete splashes after a masonry job.
Specification:
Voltage:120V AC
No Load Speed:22000rpm
Oscillating Angle:3°
Change Blade: Using Allen key
Weight: 940g(2.1lbs)
Product Dimensions:265*90*50mm/10.6*3.5*2.0inch
Package Contents:
GALAX PRO Oscillating Multi Tool* 1pc
Scraper Blade * 1pc
Wood/Plastic Plunge Blade * 1pc
Wood/Soft Metal Saw Blade * 1pc
Wood/Plastic Half Circle Saw Blade * 1pc
Sandpaper Base * 1pc
Sanding Paper: 60 grit *3pcs/120 grit *3pcs
User Manual *1
Warranty Card *1
Comments are disabled for this post.
Versatile tool Essay to put on blade. Cuts things in awkward locations that would be difficult or impossible to get to with other tools. Cut PVC drainage pipes like butter.
OK for minor jobs Like : initial impression is very good.Dislike : broke down within a week. Then i bought one from a local store, was slightly expensive but then i realized this device is very noisy, the product design is just OK. I think it gives your exactly what you pay for.Conclusion: won’t recommend buying this.
This Tool is Great- See Review If you have ever had to cut the bottom of trim for flooring using a hand saw, knife and chisel you know what a PIA that is. I saw this tool on some home improvement show and when I tackled my latest flooring project i started cutting the trim back the old fashion way. Then I remembered this tool. After a few searches I ordered it. AMZ prime delivered 2 days later and I was waiting for the delivery truck. This tool was GREAT it cut the trim back in seconds. Will NEVER go back to the old…