Partsam Headlight Assembly Replacement for Ford F150 04 05 06 07 08 Pickup, Compatible with Lincoln Mark LT 06 2007 2008, Driver and Passenger Side Pair Headlamps Amber Reflector FO2502201 FO2503201

August 3, 2019 - Comment
Add to Cart $77.59Amazon.com Price
(as of 6 April 2020 22:28 GMT+0100 - Details)

Product Features

  • Fits: 04 05 06 07 08 Ford F150 Pickup , 06 07 08 Lincoln Mark LT, Submodel Flotillera, FX2, FX4, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT, XTR, Base.
  • Part Number : 7L3Z13008FA / 7L3Z13008EA / 7L3Z13008CA / FO2503201 / FO2503247 / FO2503248
  • H13/9008 with 3157A/T10 Halogen bulds (High Low Beam Bulbs NOT included)
  • Meets or exceeds DOT & SAE Compliance Standards
  • Clear Lens/Chrome Housing

Comments

Anonymous says:

Get a 4mm wrench These headlights installed easily and looked great. The one issue you might run into is the adjuster screw rods at the top. They are longer than the original equipment and get really close to the metal frame. This made it impossible on my 2003 to adjust the headlight beam with the closed end wrench made for adjusting this style Ford headlight. I ended up taking them off after installing and back out the top adjuster and then had to order a set of small wrenches to get the 4 mm needed to…

Anonymous says:

They will let water in. Seal the joint between the Clear lens and the rear black plastic with silicone before you install. I returned the first set because within a week with no really heavy rain both lights had water inside them.Second set went in today. With a lot of Silicone. Ran a hose on them for a while and so far the are dry inside.

Anonymous says:

Cheap inferior materials, don’t purchase. As good as these headlights looked I was really hoping they would work but sadly did not.The back black plastic housing is made of the softest/inexpensive plastic I’ve ever seen. When locking the bulb sockets into place the housing plastic strips out.The bulb sockets they supplied were the blinker and side maker. Those sockets did not match/mate with my factory wiring harness. You could not make a connection.When I tried to use my old bulbs, the housing…

Comments are disabled for this post.