Wire Stripper Automatic Wire Stripping Tool Self-adjusting Cutter Crimper Multi Pliers,With cutting,crimping,stripping function , Equipped with multi-function screwdriver tools

February 15, 2020 - Comment
Add to Cart $15.99Amazon.com Price
(as of 7 April 2020 01:54 GMT+0100 - Details)

Features:

· Versatile 8 inch wire cutter.

· Fine tune the nut while sliding or damaging the wire.

· The plastic sliding block can adjust stripping length, if no need to use it, push it to another direction.

If you need to use a screwdriver, you can pull it out. Replace the screwdriver with the one you need and put it into the groove. Pay attention to the rubber ring at the bottom!Missing it will cause other screwdrivers to fall out of the bottom

· 1 x Wire Stripper

· 1 x multifunctional screwdriver

· 1 x use accessory

· 1 x manual

Specifications:

· Model: Adjustable Automatic Wire Stripper&Crimper

· Material: Alloy Carbon Steel

· Color: Yellow

· Handle length: 105 mm

· Total length: 180 mm

· Item Size: 21 * 10.5 * 1.5cm / 8.27 * 4.13 * 0.59in

· Item Weight: 317g / 11.19oz

· Package Size: 28 * 12.5 * 1.5cm / 11.02 * 4.92 * 0.59in

· Package Weight: 363g / 12.81oz

What’s this plier can do?

· Stripping Wire: All types of wire 10-24 AWG gauge(0.2-6.0mm)

· Cutting Wire: High quality blade performs efficient cutting.

· Crimping Terminal: For insulated terminals 10-22AWG(0.5-6.0mm);

Product Features

  • ▲SELF-ADJUSTING- With self-adjusting jaws to strip wire from 10AWG to 24 AWG (0.2-6MM²), and the copper swivel knob is designed to adjust the precision for different cables; The adjustable stopper also can control the length of core wire, and the wire strippers will not damage the metal part of the electrical wire,You don’t have to worry about the thread is too thin or too thick,It works everywhere!
  • ▲3 IN 1 MULTI DESIGN -Stripping, Cutting, Crimping, suitable for stripping wire; Cutting off copper, cable and aluminum wire; Crimping insulated terminals-10-22AW(0.5-6.00mm), and non-insulated terminals-12-10AWG (4.0-6.0mm) 22-14AWG (0.5-2.5mm), auto ignition terminals 7-8mm
  • ▲ ADJUSTABLE POWER & LENGTH – Designed with the copper swivel knob, can adjust the precision of the two machined jaws and change the power as you need, suitable for different cables applications; This wire stripper can fixed-length of stripping wire, make sure every cable in same length after stripped
  • ▲WHAT YOU GET ? -A premium Wire Stripper, with a versatile screwdriver and accessories, including instruction manual and gadgetry, screwdriver comes in a variety of shapes, all suitable.
  • ▲PERFECT PLIERS ! This tool will definitely be the most popular product in 2020, it has a perfect design, using the lever principle to reduce the use of energy, save your time, improve work efficiency, the appearance of the use of yellow ABS plastic, not easy to wear, and a good protection tool to make it not easy to rust!For the metal part, we use high quality steel, which is treated by heat treatment, polishing and black oxidation,Increase the hardness, more durable, extend the service life.

Comments

Anonymous says:

Worked great! Have a great connection with it as well Worked great! Have a great connection with it as well!

Anonymous says:

It started looking like a rats nest I needed to shorten my 75′ coax cable That was attached to my outdoor antenna. It started looking like a rats nest, but did not want to my another cable as the one I had was perfectly fine.I never used one of these before, so I was a bit worried about how to do it. After a few minutes of fumbling around for some scrap cable, I noticed that it was not cutting the two seperate cuts like it should have. After looking at some how to vids, I learned that both blades on the cutter can be…

Anonymous says:

For those of you who NEED INSTRUCTIONS on how to use this Kit, or have ZERO experience with this, you might find this helpful! Length:: 5:22 Mins I needed to re-size a coaxial cable in my home, so started researching the process. I ended up ordering this kit and received it yesterday, and I have ZERO experience in changing out the connector on a coaxial cable. I see the orange colored X thing on the coax stripper in the kit with numbers and letters, and no idea how to change those. I also see the Blade inside there and no idea how to move the blade to a different setting! The BAD news is…

Comments are disabled for this post.