Bestgle Hot Air Gun, Mini Heat Gun Shrink Wrap for Embossing, Multi-Purpose Hand Hold Embossing Heat Tools for Crafts 300W
October 30, 2017 - Comment
With Bestgle Hot Air Gun
100% Brand New and High Quality
Can be used to heating relief powder and shrinkable sheet
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat gun at high temperature to blow a few seconds
It not only can add its hardness, but also its brightness
The temperature can not adjustable, in theory, it can reach at 200 degree within a few seconds
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck
Be careful when using the hot air gun
FEATURE:
Color: Black
Material: ABS
Size: 240*50mm / 9.44*1.97in, wire length 140cm
Type: Constant temperature
Working temperature: It can reach at about 200°C / 390°F within a few seconds
Rated power: 300W
Power type: AC power supply
Rated voltage:110v
Power:50-60Hz
Working time: 8 minutes
Usage:
1.Plug in the heat tool
2.Hold the gun but do not touch the hot nozzle
3.Keep 5-6cm distance between the heat gun and your work, about 45° for heating until the completion of the work
4.Turn off the power to stay cool
Notes:
1.This kind of gun can not adjust the temperature but it heats up quickly at about 200℃ theoretically.
Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Packing details:
1*Hot Air Gun
1*Detailed Instructions
Product Features
- Made of high quality ABS plastic outside and stainless steel inside, simple and durable. New US standard, not required voltage converter any more.
- Dimension: 240*50mm / 9.44*1.97in. Voltage:110V. The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
- The temprature can not be adjusted, but it can reach at about 200°C / 390°F within a few seconds abstractly which heat up quickly and works like a charm. And do not use it more than 10 minutes in one time, just turn off then turn on for working continuously.
- Easy to use. Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed. With the 45 degree it can avoid heat suck.
- This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Comments
Comments are disabled for this post.
It’s okay if you aren’t going to need to use it a lot Ordered for basket sealing at work (was tired of bringing mine from home when needed). It did an okay job at sealing the basket I was working on, but not as good of a job as my home hot air gun (unsure of brand). Took a little longer than I’m used to. However, the hot air gun I use at home has a tendency to burn holes in the shrink wrap if I’m not really careful. This one didn’t get hot enough to do that.
Not all hot air comes from politicians… Right out of the box I used this heat gun to soften the glue inside two different cell phones to replace parts. This instrument is easy to use, light to hold and provides a perfect amount of heat for any application. It is exactly what I have been looking for to start working on these annoying small devices (cell phones, tablets, etc.) With all the front screens and back covers held together with glue, this is a must-have tool for anybody masochistic enough to start repairing these devices…
Great quality heating tool. Product matches description and function as advertised. Very good quality heat gun that I use for shrink wrapping stereo harness and other wire installs. The item is very safe and I have not had any problems with personal injury or damage to product this was being used on. Great for hobbies and small jobs requiring heat to shrink wrap or whatever your needs. I find that it can be used either turning off and on but find it works best if you prepare whatever your working on and leaving heat on so…