Item’s color might be different from the picture because of the aberration.
Feature:
Solid state, vibration free, noise-free.
Simple to install and operate.
Each device is fully inspected and tested.
Fitted with 2.85 inch insulated leads .
Perimeter sealer for moisture protection.
This device must be used in conjunction with a heat sink to avoid burned.
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
It will even generate electricity if you apply heat to one side while keeping the other side cold.
MODEL: TEC1-12730(TE is the abbreviation of Thermo-Electric)
Maxiumu power consumption :456 Watts
Output cooling power: 253W
Operates from 0-15.2 volts DC and 0-30 amps
Operates at -60 °C to +180 °C ambient temperature
Size: 62mm x 62mm x 4.8mm
Weight:62g
Package include:
1 x TEC1-12730 Thermoelectric Peltier Cooler
Comments are disabled for this post.
Jean Peltier would be very impressed! Peltier Thermoelectric Heat Pump
Size DOES matter! More or less, anyway. Always pick out your Peltier devices based on what you need and always keep in check a desire to think, “Bigger is better!”. The fact is, the bigger the Peltier, the more current it will pull and the more massive your hot-side cooling solution will need to be. Peltiers generate an ENORMOUS amount of heat on the hot side and generate their cold very, very inefficiently, so never go into this thinking they are some kind of a miracle that does it all. They don’t,…
All works quite nice, but you better have an outside outlet for … This Peltier is the largest unit I have purchased to date. I have several smaller units, but this puts out the most “cold” I’ve ever seen. When I first received it, I tested it with a 1.5 volt D cell battery. It started getting cold/hot almost instantly even with that low power battery (great way to test without burning yourself I might add…and also an excellent, safe way to find the “cold side”). This Peltier unit will require a large power supply. Just to be sure I had…