CB Antenna 28 inch 27 Mhz,Portable Indoor/Outdoor Antenna Full Kit with Heavy Duty Magnet Mount Mobile/Car Radio Antenna Compatible with President Midland Cobra Uniden Anytone
April 9, 2019 - Comment
ELECTRICAL SPECIFICATIONS
Frequency Range : 26-28MHz
Impedance : 50 Ohm
VSWR : less than 1.5
Gain : 2dBi
Polarization : Vertical
Radition : Omni
Max. Power Input-watts : 150 W
MECHANICAL SPECIFICATIONS
Height : 710±10mm,28 inch
Termination Connector : PL259
Radiating Element Material : Copper
Compatible with :
Uniden: BEARCAT 880 CMX760 PC78LTX PC787
Cobra: 29LX 29LTD 29NW
Miland: 75-822 5001Z 1001LWX
Galaxy: DX-959B DX-949
President: McKinley USA ect
Product Features
- 1.Long Antenna – TALLER ANTENNAS + Copper Material =Superior Quality BETTER RANGE! 28 Inch long for ultimate range & receiving!
- 2.FULL KIT – includes magnet mount with pre-intalled 16 ft of coaxial cable, coil load, and stainless steel whip.
- 3. Magnetic base – Improve reception by harnessing large metal surfaces.
- 4.Weather Channel Capable, Covers all CB frequencies.
- 5.Warranty would be valid for 12 months against manufacturing defect.
Comments
Comments are disabled for this post.
Good little antenna. We use these antennas on construction equipment that is vigorously used. We have had no problems with the antenna and they are very easy to install and work wonderfully. Would recommend for use in extreme conditions.
Works as it should We used this all weekend at Winter 4×4 Jamboree in southern Utah with our handheld Uniden. Needed an adapter. Works great. The magnet is strong and it didnât shift at all after 50+ miles of off-road driving and 20 miles of highway / interstate driving. We were able to hear the trail leader and the tail gunner perfectly in a 30 Jeep group.
Very cheap, Almost useless… For starters, the magnet is a little weak and the allen key that came with the antenna is too small… I had to get my own in order to tune the antenna.I placed the antenna in the middle of the roof of my full size crew cab truck. The best possible spot for an antenna having a large flat ground plane. I tuned the antennas SWR and the best I could get is 2.3 on channels 1 and 40 with 20 coming in at 1.5. The SWR is a little high on 1 and 40 and barely acceptable on 20. The lack of…