Mini Heat Gun, Your Supermart Hot Air Gun Shrink Gun Tools with Stand For Drying Paint Multi-Purpose Electric Heating Nozzle and DIY Embossing 300W Power 110V (Black)
March 1, 2018 - Comment
Note:
1.Do not use hot air guns with chemical type (plastic) scraper.
2.After use, the nozzle or scraper to remove the dry paint to avoid fire.
3.do not use the hot air gun hair as a hair dryer.
4. Do not direct the hot air against people or animals.
5. Do not touch the nozzle when the hot air gun is in use or just after use. The handle of the hot air gun must be kept dry, clean and away from oil or gas.
6. Hot air gun to be completely cooled before storage.
Specifications:
Material ： Plastic
Color: Black
Length: 24cm
Working temp.: 200 ℃
Rated Power: 300W
Rated voltage: 110V 50-60HZ
Weight: 310g
Type: Constant temp. hot air gun
Plug Type: US Plug
Package Included
1 x Hot Air Gun
Product Features
- Made of high quality ABS plastic outside and stainless steel inside, simple and durable. New US standard, not required voltage converter any more.
- Dimension: 240*50mm / 9.44*1.97in. Voltage:110V. The left and right sides have a heat sink, the internal temperature of the hot air gun is reduced, and the service life is prolonged.
- The temprature can not be adjusted, but it can reach at about 200℃ / 390℉ within a few seconds abstractly which heat up quickly and works like a charm. And do not use it more than 10 minutes in one time, just turn off then turn on for working conti
- Easy to use. Just keep 5-6cm distance from your amazing work and to heat it at about a 45° angle until completed. With the 45¡ã it can avoid heat suck.Do not direct the hot air against people or animals.Do not touch the nozzle when the hot air gun is in use or just after use. The handle of the hot air gun must be kept dry, clean and away from oil or gas.
- This excellent compact heat gun can be used for heating shrinkable film, embossed powder,relief powder and shrinkable sheet,rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Comments
Comments are disabled for this post.
Works so well I like it so much, I used with embossing powder and watercolors. My only suggest is the cable should be larger
Heats up quickly and put out pretty good heat I use this to repair cell phones. Some phones need to be heated up (Samsung Galaxy) to be able to remove the screen or back glass. It heats up pretty good, however its a bit loud. It does what I intend to use it for and doesn’t take much time to heat up. The sticker came off that says caution hot as soon as I removed from packaging.
– The body of the heat gun is made of sturdy plastic with a steel tip coated with plastic to … This heat gun comes in a small package, where we can find:- A small heat gun wrapped in a plastic protector.- The body of the heat gun is made of sturdy plastic with a steel tip coated with plastic to protect against heat.- A small sheet which describes the indications of use and precautions when using.I use this product with great success to:Small electronic works, take off rubber, heat plastic to mold.The heat it generates is…